Electric heating and cooling solutions for industry

Home > Support & Help > User manuals

Instructions for use

Click here to download user manuals for our standardized, custom-built products. Instructions for catalog products are also available online via our e-catalog.

All documentation is regularly updated to guarantee reliable and accessible information at all times.

diverted project battery (web)

Batteries for rectangular sheath 6594

Rectangular duct heaters are designed to heat air flows up to 110°C for industrial process or air-conditioning (AHU) applications. Available in steel or stainless steel, they are equipped with a safety device (thermostat or sensor).
UT 6594 A

process battery

Batteries for rectangular sheath 6595

Rectangular duct heaters are designed to heat air flows up to 300°C for industrial process applications. They are available in steel or stainless steel and are equipped with a safety device (thermostat or sensor).
UTFR 6595 A

terminal battery rectangular sheath

Rectangular terminal batteries 60511/2/3

Terminal coils for rectangular air-conditioning ducts are designed to heat airflow up to 40°C. They are available in galvanized or stainless steel, and are fitted as standard with a temperature limiter.
Reference no.: UT 60511/2/3 C

terminal battery for rectangular sheath 60512 19

Rectangular terminal batteries 60521/2/3

Terminal coils for rectangular air-conditioning ducts are designed to heat airflow up to 40°C. They are available in galvanized or stainless steel, and are fitted as standard with a temperature limiter.
Reference no.: UT 60521/2/3 B

terminal battery circular sheath

Round terminal batteries 6055

Round terminal coils, DN 125 to 500, are designed to heat air flow to a maximum of 40°C. They are available in galvanized or stainless steel and are fitted as standard with a temperature limiter preset at 115°C.
UTFR 6055 B

mineral insulated cables page

Mineral insulated heating cables

Mineral-insulated cables enable heating up to 500°C. Robust, watertight and non-combustible, they feature a cold outlet at each end, with a watertight feedthrough for connection to an IP55 enclosure.
UT 26115 to 26747 - ind. B

vulstar monotubular resistance

Cartridge heaters

Vulstar® low-load, medium-load, high-load or long-length cartridge heaters are used for heating liquids or gases by convection and solids by conduction or radiation, requiring electrical connections at one end only.
UT 81086.13 - A - FR/EN

metal heating belt

Metal heating belts 7507

Waterproof and sturdy, metal heating belts are designed to maintain or raise the temperature of liquids in a drum. They can be fitted with a 0/200°C control thermostat.
UT 7507 A

air conditioner 80740 00 view 1 (web)

CAH horizontal cabinet air conditioners

Air conditioners for dissipating heat during operation of electronic components in machine control cabinets. For mounting on the cabinet roof.
Reference no.: UT 80743/45/97/99 EN ind A

air conditioner 80812 08 view 1 (web)

AC vertical cabinet air conditioners

Air conditioners for dissipating heat during operation of electronic components in machine control cabinets. For mounting on cabinet doors or side panels.
Reference no.: UT 80812/14/34/40 EN ind D

1-sector waterproof heating collar view1

4750 waterproof clamps

Watertight armored clamps are designed for heating cylindrical shapes up to 450°C in harsh environments (vibration, humidity, run-off, etc.). They are available in 1, 2 or 3 clamp sectors.
UT Armored clamps ind A

nitrogen air circulation heater page

Circulating air and gas heaters

Heaters are designed to heat circulating air and gas. Consisting of 1 to 4 steel or stainless steel bodies, they are fitted with a body safety thermostat and can be supplied insulated.
UT Gas heater ind I

dn80 circulating domestic hot water heaters

Circulating domestic hot water heaters

These heaters are designed to heat circulating domestic hot water. Consisting of 1 DN 80 steel body, they are fitted with a body safety thermostat and can be supplied insulated.
Instruction no.: UT 10705/45 C

In-line low flow heater 10706-75

Low flow fluid heaters 10706/7

Low-flow heaters with 1 DN 20 to DN 40 body are designed for heating circulating liquids or gases. They can be fitted with a Pt100 or thermocouple control sensor.
Reference no.: UT 10706/7 F

circulating fluid heater

Circulating liquid heaters DN 50

Heaters are designed to heat circulating liquids. Consisting of 1 to 4 DN 50 steel or stainless steel bodies, they are fitted with a body safety thermostat and can be supplied insulated.
UT 10631/2/4 & 41/2/4 B

Heater 10701-08

Circulating liquid heaters DN 80

Heaters are designed to heat circulating liquids. Consisting of 1 to 4 DN 80 steel or stainless steel bodies, they are fitted with a body safety thermostat and can be supplied insulated.
Reference no.: UT 10701/2/4 & 41/2/4 C

temperature regulator pid 48x48

48×48 "On/Off" controllers 30633

Class 2 "On/Off" 48 x 48 controller with 3-digit digital display. Configurable input (Pt100, thermocouple K, J or T). 1 2A/240V potential-free changeover relay output.
UT 30633 A

temperature regulator pid 48x48

Self-adaptive 48×48 PID controllers 30656

Self-adaptive 48 x 48 PID controller with simultaneous display of measurement and setpoint. Configurable input (Pt100, thermocouple, analog current or voltage). 1 main output, 2 optional outputs and 1 option A card.
Reference no.: 30656 EN ind B

temperature regulator pid 48x96

Self-adaptive 48×96 PID controllers 30881

Self-tuning 48 x 96 PID controller with simultaneous display of measurement and setpoint. Configurable input (Pt100, thermocouple, analog current or voltage). 1 main output, 2 optional outputs and 2 option boards A and B.
Reference no.: 30881 EN ind A

barrel resistance

Cylinder resistors

Barrel-mounted resistors are designed to heat a liquid in a tank via a thermowell. The heating element can be replaced without draining the tank.
UT 1005 A

screw-in immersion heater m77 red case

Screw-in immersion heaters type 2300

Immersion heaters for static or circulating heating of liquids or gases. They consist of 1 to a maximum of 9 heating pins welded or brazed onto a threaded fixing plug, and can be fitted with a safety or regulation device and a protective cover.
UT 81086-01 - C - FR/EN

fluoropolymer immersion heater range (web)

Fluoropolymer immersion heaters

Fluoropolymer immersion heaters are particularly suitable for heating acid or soda solutions. They consist of a Teflon-coated heating cable mounted on a PVDF or Polypropylene frame.
Reference no.: DEFN-11 B

flange-mounted immersion heater

Type 2400 flange-mounted immersion heaters

Immersion heaters for static or circulating heating of liquids or gases. They consist of 1 to a maximum of 9 heating pins welded or brazed to a mounting flange, and can be fitted with a safety or regulation device and a protective cover.
Reference no.: 81086.02 - C - FR/EN

vulcaloy immersion heater

VULCALOY 1789 flange-mounted immersion heaters

Triangular flange-mounted immersion heaters for domestic hot water heating, static or circulating, up to 110°C. They are fitted as standard with a swiveling waterproof housing.
Reference no.: UT 1789 C

Heated silicone fabrics 26156

Silicone fabrics for heating and maintaining the temperature of flat, cylindrical or conical parts. With or without adhesive face, they can be fitted with a Pt100 control sensor and a temperature limiter.
UT Silicone fabric heaters type 26156 ind A

static power unit 3025201

Three-phase power units 30252-75 to 200A

Three-phase static power units with SSR logic or 4-20 mA analog input to drive currents on resistive loads from 75 to 200 A. They feature forced ventilation and ultra-fast fuses.
UT81086.12 - A - FR-EN - 30252 - Power unit 75 to 200A

Fill in the form below to apply for the position of : Cartridge Heaters

* All fields must be completed

Fill in the form below to submityour unsolicited application

* All fields must be completed