Rectangular duct heaters are designed to heat air flows up to 110°C for industrial process or air-conditioning (AHU) applications. Available in steel or stainless steel, they are equipped with a safety device (thermostat or sensor).
UT 6594 A
Click here to download user manuals for our standardized, custom-built products. Instructions for catalog products are also available online via our e-catalog.
All documentation is regularly updated to guarantee reliable and accessible information at all times.
Batteries for rectangular sheath 6594
Batteries for rectangular sheath 6595
Rectangular duct heaters are designed to heat air flows up to 300°C for industrial process applications. They are available in steel or stainless steel and are equipped with a safety device (thermostat or sensor).
UTFR 6595 A
Rectangular terminal batteries 60511/2/3
Terminal coils for rectangular air-conditioning ducts are designed to heat airflow up to 40°C. They are available in galvanized or stainless steel, and are fitted as standard with a temperature limiter.
Reference no.: UT 60511/2/3 C
Rectangular terminal batteries 60521/2/3
Terminal coils for rectangular air-conditioning ducts are designed to heat airflow up to 40°C. They are available in galvanized or stainless steel, and are fitted as standard with a temperature limiter.
Reference no.: UT 60521/2/3 B
Round terminal batteries 6055
Round terminal coils, DN 125 to 500, are designed to heat air flow to a maximum of 40°C. They are available in galvanized or stainless steel and are fitted as standard with a temperature limiter preset at 115°C.
UTFR 6055 B
Mineral insulated heating cables
Mineral-insulated cables enable heating up to 500°C. Robust, watertight and non-combustible, they feature a cold outlet at each end, with a watertight feedthrough for connection to an IP55 enclosure.
UT 26115 to 26747 - ind. B
Cartridge heaters
Vulstar® low-load, medium-load, high-load or long-length cartridge heaters are used for heating liquids or gases by convection and solids by conduction or radiation, requiring electrical connections at one end only.
UT 81086.13 - A - FR/EN
Metal heating belts 7507
Waterproof and sturdy, metal heating belts are designed to maintain or raise the temperature of liquids in a drum. They can be fitted with a 0/200°C control thermostat.
UT 7507 A
CAH horizontal cabinet air conditioners
Air conditioners for dissipating heat during operation of electronic components in machine control cabinets. For mounting on the cabinet roof.
Reference no.: UT 80743/45/97/99 EN ind A
AC vertical cabinet air conditioners
Air conditioners for dissipating heat during operation of electronic components in machine control cabinets. For mounting on cabinet doors or side panels.
Reference no.: UT 80812/14/34/40 EN ind D
4750 waterproof clamps
Watertight armored clamps are designed for heating cylindrical shapes up to 450°C in harsh environments (vibration, humidity, run-off, etc.). They are available in 1, 2 or 3 clamp sectors.
UT Armored clamps ind A
ATEX 6018 Heaters
ATEX-certified industrial heaters are designed to heat industrial facilities, technical enclosures, paint booths, storage areas for flammable products, gas stations, drilling platforms, and other locations requiring the use of equipment certified to ATEX Directive 2014/34/EU for explosive atmospheres. Explosion-proof equipment for surface industries, suitable for use in gas or dust environments.
Circulating air and gas heaters
Heaters are designed to heat circulating air and gas. Consisting of 1 to 4 steel or stainless steel bodies, they are fitted with a body safety thermostat and can be supplied insulated.
UT Gas heater ind I
Circulating domestic hot water heaters
These heaters are designed to heat circulating domestic hot water. Consisting of 1 DN 80 steel body, they are fitted with a body safety thermostat and can be supplied insulated.
Instruction no.: UT 10705/45 C
Low flow fluid heaters 10706/7
Low-flow heaters with 1 DN 20 to DN 40 body are designed for heating circulating liquids or gases. They can be fitted with a Pt100 or thermocouple control sensor.
Reference no.: UT 10706/7 F
Circulating liquid heaters DN 50
Heaters are designed to heat circulating liquids. Consisting of 1 to 4 DN 50 steel or stainless steel bodies, they are fitted with a body safety thermostat and can be supplied insulated.
UT 10631/2/4 & 41/2/4 B
Circulating liquid heaters DN 80
Heaters are designed to heat circulating liquids. Consisting of 1 to 4 DN 80 steel or stainless steel bodies, they are fitted with a body safety thermostat and can be supplied insulated.
Reference no.: UT 10701/2/4 & 41/2/4 C
48×48 "On/Off" controllers 30633
Class 2 "On/Off" 48 x 48 controller with 3-digit digital display. Configurable input (Pt100, thermocouple K, J or T). 1 2A/240V potential-free changeover relay output.
UT 30633 A
Self-adaptive 48×48 PID controllers 30656
Self-adaptive 48 x 48 PID controller with simultaneous display of measurement and setpoint. Configurable input (Pt100, thermocouple, analog current or voltage). 1 main output, 2 optional outputs and 1 option A card.
Reference no.: 30656 EN ind B
Self-adaptive 48×96 PID controllers 30881
Self-tuning 48 x 96 PID controller with simultaneous display of measurement and setpoint. Configurable input (Pt100, thermocouple, analog current or voltage). 1 main output, 2 optional outputs and 2 option boards A and B.
Reference no.: 30881 EN ind A
Cylinder resistors
Barrel-mounted resistors are designed to heat a liquid in a tank via a thermowell. The heating element can be replaced without draining the tank.
UT 1005 A
Screw plug immersion heater 2300
Immersion heaters for static or circulating heating of liquids or gases. They consist of 1 to a maximum of 9 heating pins welded or brazed onto a threaded fixing plug, and can be fitted with a safety or regulation device and a protective cover.
UT 81086-01 - C - FR/EN
Fluoropolymer immersion heaters
Fluoropolymer immersion heaters are particularly suitable for heating acid or soda solutions. They consist of a Teflon-coated heating cable mounted on a PVDF or Polypropylene frame.
Reference no.: DEFN-11 B
Type 2400 flange-mounted immersion heaters
Immersion heaters for static or circulating heating of liquids or gases. They consist of 1 to a maximum of 9 heating pins welded or brazed to a mounting flange, and can be fitted with a safety or regulation device and a protective cover.
Reference no.: 81086.02 - C - FR/EN
VULCALOY 1789 flange-mounted immersion heaters
Triangular flange-mounted immersion heaters for domestic hot water heating, static or circulating, up to 110°C. They are fitted as standard with a swiveling waterproof housing.
Reference no.: UT 1789 C
Heated silicone fabrics 26156
Silicone fabrics for heating and maintaining the temperature of flat, cylindrical or conical parts. With or without adhesive face, they can be fitted with a Pt100 control sensor and a temperature limiter.
UT Silicone fabric heaters type 26156 ind A
Three-phase power units 30252-75 to 200A
Three-phase static power units with SSR logic or 4-20 mA analog input to drive currents on resistive loads from 75 to 200 A. They feature forced ventilation and ultra-fast fuses.
UT81086.12 - A - FR-EN - 30252 - Power unit 75 to 200A