DN 125 (5″) to DN 500 (20″) FLANGE IMMERSION HEATER, ATEX/IECEX CERTIFIED

ATEX certified according to Directive 2014/34/EU or IECEx, for installation in an explosive atmosphere (risk zone 1 and 2) and for a temperature class from T1 to T6.

ATEX/IECExcertified flange immersion heaters are designed for the heating of non-hazardous fluids (water, oil, heavy fuel, glycol, acids, caustic soda, asphalt, etc.) or gases (air, nitrogen, oxygen, CO2, etc.) by natural or forced convection up to 1500 kW, 750 V 3-ph, 400 °C,

50 bar.

 Horizontal or vertical mounting on the vessels for static fluids or inside vessels for fluid circulation heaters.

Vulcanic ATEX/IECEx certified flange immersion heaters comprise a very compact bundle of pin heating elements available in various materials compatible with the fluids to be heated (steel, stainless steel, Incoloy®, etc.).

The heating elements are welded onto a flange conforming to standard EN1092-1 or ASME B16.5, with dimensions from DN125 (5”) to DN500 (20”).

ATEX/IECEx certified flange immersion heaters are equipped with safety devices (thermostats, fusible sensors, thermocouples, etc.) for the measurement of the temperature in the fluid or of the heating elements, and optionally, a control device.

An electrical control and power supply unit with protection mode “e”, “d” or “de”, in painted steel, cast iron, aluminium or stainless steel, protects the connections from the heating elements to the power supply and from the control and safety devices to the power cabinet.

Vulcanic flange immersion heaters are designed and manufactured as part of our standard range or as a customised solution for installation on vessels conforming to European directive 2014/68/EU (PED).

conformité CEmatériel ATEX              matériel IECEX

ATEX DN 125 to DN 500 flange immersion heaters

ATEX certified flange immersion heater

with protection mode ”de”

ATEX certified flange immersion heaters

ATEX certified flange immersion heater

with protection mode ”d”