Pdf version

	104	TEMPERATURE CONTROLLERS	Summary
			<< Previous
			Next >>

CHOOSING A CONTROLLER

The VULCANIC range of controllers covers the great majority of industry requirements. Following steps will help you to define the right controller.

1) define the desired control precision: if ± 5°C, choose an ‘ON/OFF’ controller ; for greater precision, consider a ‘PID’ appliance. 2) Know what kind of temperature input is used : PT100 - Thermocouple - Current – Voltage. 3) Know what kind of power supply device is to be driven, so as to choose the type of control output (usually called ‘Output P/N.1): - for a contactor, choose a controller with a ‘relay’ output - for a power unit, choose a controller with a ”numeric” output - for a device with an analogic input (eg : motorised valve) choose a controller with an ”Analogic” output. 4) Know what use will be made of the auxiliary outputs (usually called ‘Output N°2 and N°3’) : choose a ”Relay” output to drive an alarm, ”Current or Voltage” for a measurement repeater, and/or “Cold” output 2 to drive an ON/OFF valve for a cooling system.

48x48 ON/OFF CONTROLLERS WITH 3-DIGIT DISPLAY

Class 0,2 controllers, large-size 3 digit display, lockable setting, configurable input (PT100 – J-, K-, T-type thermocouples), panel mounted or fastened to DIN rail. Supplied pre-set. 1 relay output, double-throw contacts, 2A/240V. Supply voltage : 90 to 264 V - 50/60 Hz. Weight 0,2 kg.

Depth. : 100mm.

P/N Input Temperature range (°C) 30633-01 PT 100 -50/+100 30633-51 PT 100 0/+100 30633-41 PT 100 -50/+300 30633-12 TC/J 0/+200 30633-22 TC/J 0/+400 30633-02 TC/J 0/+600 30633-03 TC/K 0/+800

48x48 AUTOTUNE CONFIGURABLE PID TEMPERATURE CONTROLLERS

Autotune PID temperature controllers with 3 outputs. Configurable input :  RTD (PT100) or thermocouples type B/J/K/L/M/R/S/T, or analogic voltage 0/10 V , 2/10 V, 0/5 V, 1/5 V, 0 / 50 mV, 1/50 mV, or loop powered analogic current 0/20 mA, 4/20 mA. Main output on request : SPDT relay 2 A / 240 VAC (on a resistive load) and pulse wave modulation 0/10 VDC for SSR (period 0,25 to 512 seconds / 20 mA max) configurable by strap, analog voltage 0/5 V, 0/10 V, 2/10 V or analogic current 0/20 mA, 4/20 mA (powered in 24 VDC). Output 2 and 3 on request : same as output 1. Optional circuit board A : see table hereafter.  On/off optional control with adjustable differential, simultaneous display of measurement (red LED 8 mm high) and setpoint (green LED 6 mm high). Selftuning available during switch on operation. Supply voltage 100 to 240 VAC +/- 10% 50/60 Hz. Class 0,1. Front panel to IP 66. Mass 0,21 kg. Removable casing depth 110 mm, for cutting 45 X 45 mm.

Depth. : 110mm.

P/N	Old	Input	Range	Output	Output	Output
	P/N		Temp. (°C)	Regulation	2	3
30656-01	30655-01	PT 100	-50/+350	Relay	Alarm	-
30656-02	30655-02	PT 100	-50/+350	Logic	Alarm	-
30656-03	30655-03	PT 100	-50/+350	Relay	Cold relay	Alarm
30656-04	30655-04	PT 100	-50/+350	Logic	Cold relay	Alarm
30656-13	30655-13	TC/J	0/+450	Relay	Alarm	-
30656-14	30655-14	TC/J	0/+450	Relay	Cold relay	Alarm
30656-15	30655-15	TC/J	0/+450	Logic	Alarm	-
30656-16	30655-16	TC/J	0/+450	Logic	Cold relay	Alarm
30656-21	30655-21	TC/K	0/+1200	Relay	Alarm	-
30656-23	30655-23	TC/K	0/+1200	Logic	Alarm	-
30656-05	-	PT100	-50/+350	Analogic	Alarm	-
30656-17	-	TC/J	0/+450	Analogic	Alarm	-
30656-24	-	TC/K	0/+1200	Analogic	Alarm	-

Microcards for reconfiguring the appliance ( they are used for PID controllers type 30656 or 30881 )
30656-92	SPDT relay and PWM circuit board for main output
30656-96	Analog circuit board for main output ( voltage or current )
30656-90	SPDT relay circuit board for output 2 and 3
30656-91	Analog circuit board for output 2 or 3 ( voltage or current )
30656-99	PWM circuit board for output 2 or 3
30656-93	RS 485 circuit board, MODBUS or ASCII for option A
30656-97	Carte consigne analogique 0/5 VDC ou 0/10 VDC ou 2/10 VDC ou 0/20mA ou 4/20mA, pour option A
30656-95	Setpoint selection by single pole contact for option A
30656-98	Power supply 24 VDC / 20 mA for cooled output

48x96 AUTOTUNE CONFIGURABLE PID TEMPERATURE CONTROLLERS

Autotune PID temperature controllers with 3 outputs. Configurable input :  RTD (PT100) or thermocouples type B/J/K/L/M/R/S/T, or analog voltage 0/10 V , 2/10 V, 0/5 V, 1/5 V, 0 / 50 mV, 1/50 mV, or loop powered analogic current 0/20 mA, 4/20 mA. Main output on request : SPDT relay 2 A / 240 VAC (on a resistive load) and pulse wave modulation 0/10 VDC for SSR (period 0,25 to 512 seconds / 20 mA max) configurable by strap, analog voltage 0/5 V, 0/10 V, 2/10 V or analogic current 0/20 mA, 4/20 mA (powered in 24 VDC). Output 2 and 3 on request : same as output 1. Optional circuit boards A and B : see table above.  On/off optional control with adjustable differential, simultaneous display of measurement (red LED 8 mm high) and setpoint (green LED 6 mm high). Selftuning available during switch on operation. Supply voltage 100 to 240 VAC +/- 10% 50/60 Hz. Class 0,1. Front panel to IP 66. Mass 0,27 kg. Removable casing depth 100 mm, for cutting 45 X 92 mm.

P/N	Input	Range	Output	Output	Output
		Temp. (°C)	regulation	2	3
30881-01	PT 100	-50/+350	Relay	Alarm	-
30881-02	PT 100	-50/+350	Logic	Alarm	-
30881-03	PT 100	-50/+350	Relay	Cold relay	Alarm
30881-04	PT 100	-50/+350	Logic	Cold relay	Alarm
30881-05	PT 100	-50/+350	Analogic	Alarm	-
30881-13	TC/J	0/+450	Relay	Alarm	-
30881-14	TC/J	0/+450	Relay	Cold relay	Alarm
30881-15	TC/J	0/+450	Logic	Alarm	-
30881-16	TC/J	0/+450	Logic	Cold relay	Alarm
30881-17	TC/J	0/+450	Analogic	Alarm	-
30881-21	TC/K	0/+1200	Relay	Alarm	-
30881-23	TC/K	0/+1200	Logic	Alarm	-
30881-24	TC/K	0/+1200	Analogic	Alarm	-

Microcards for reconfiguring the appliance
30881-90	Circuit board for analogic remote setpoint : 0/5 VDC, 0/10 VDC, 2/10 VDC or 0/ 20 mA or 4/ 20 mA for option B, with local / remote switching by contact out of potential

Home

Vulcanic

Solutions

News

Contact us

Site map